Quick Start - Sharp XV-Z2000 Operation Manual

Quick Start

This section shows the basic operation. For details, see the page described below for each step.
Setup and Projection
Connection of the projector and the video equipment with an S-video terminal is explained as an
example below.
1.
Place the projector facing a screen
2.
Connect the projector to the video equipment and plug the
power cord into the AC socket of the projector
Connect the audio output terminal of the video equipment to the audio input
terminal of the audio equipment using an audio cable.
3.
Remove the lens cap and turn the projector on
-14
3 ON button
8 STNADBY button
6 ZOOM/FOCUS button
6 Adjustment buttons ('/"/\/|)
4 INPUT button
6 HEIGHT ADJUST button
On the projector
8 STNADBY button
3 ON button
7 KEYSTONE button
6, 7 Adjustment buttons
('/"/\/|)
6 ZOOM/FOCUS button
4 INPUT buttons,
DIGITAL INPUT button
Page 16
Pages 21-28
On the remote control
Page 28