Quick Reference Control Operation - Sharp CR20S10 Operation Manual

Quick Reference Control Operation

Quick Reference Control Operation
L Location of Controls
Front Panel
SENSOR AREA FOR
REMOTE CONTROL
POWER
Press On.
Press again Off.
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 19.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE SELECT
SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
See page 23.
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote
control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
05-07 CR20S10[E].pm65
POWER
POWER
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
POWER
TV DVD
DISPLAY INPUT
VCR
1 2 3
4 5 6
7 8 9
FLASHBACK ENTER
0 100
PERSONAL PREFERENCE
A B C D
CH
VOL VOL
— +
CH
MENU MUTE
CATV TV
DVD VCR
REW PLAY FF
CH/SKIP
PAUSE STOP REC
TV • CATV • VCR • DVD
5
(ENGLISH)
IN
VIDEO/AUDIO
TERMINALS
(VIDEO/AUDIO terminals are
also provided on the rear.)
CHANNEL UP/DOWN – MENU
(8) Selects next higher channel.
(9) Selects next lower channel.
• Press both at the same time to
access the MAIN MENU screen.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switch to external video input
mode.
Press again Switch to TV mode.
See page 22.
ENTER
Used in some instances where a Cable
Converter Box requires an "enter"
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 23)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 16 ~
channel presetting.
• Moves the " " mark of the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
• CLOSED CAPTION appears when
sound is muted.
25/5/01, 2:25 pm
18 for
5