Ricoh Caplio RZ1 User Manual page 101

Note
• Once the power is turned off or change the mode, the Quick Review function can no longer
recall the most recently taken image.
• When the Power-Save mode is set to ON, if the power is turned on or the mode dial is
turned to another position, a warning appears for about two seconds to indicate Power-
Save mode.
• Pressing the F (Flash) button allows you to turn the LCD Monitor Display on, and then
change the flash setting (see P.32). Press the shutter button or O button to turn the LCD
Monitor Display off.
Caution
If you have activated Power-Save mode, power consumption will be reduced, but there are
the following limitations:
• Processing time may be slower.
• It works only in Still Image/Movie modes. It does not work in Playback Mode.
99