Using The Caplio Software To Download Images - Ricoh Caplio R5 User Manual

Using the Caplio Software to Download Images

In Windows the first time you connect your camera to the computer
using a USB cable, the [Found New Hardware Wizard] screen will
appear. (Does not appear on Macintosh.)
Here is an example of the Windows XP screen.
1
Select [Install the software
automatically (Recommended)].
2
Insert the Caplio Software CD-
ROM into the CD-ROM drive on
your computer.
• Installation of the WIA driver
automatically starts. If the CD-ROM is
already on your computer when the
[Found New Hardware Wizard] screen is displayed, simply click [Next]
to start installation.
Note ----------------------------------------------------------------------------------------------
By default, the WIA driver is installed in the following location:
Specify the folder if the CD-ROM is not available.
6
3
Select [RICOH Gate La], check
[Always use this program for
this action] check box, and
then click [OK].
160
My Computer
Local Disk
Program Files
Caplio Software
WIA driver