Pairing Bluetooth Devices - LG LS670 User Manual

Pairing Bluetooth Devices

Paired Devices
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device. When you pair devices, they share a
passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap
to place a checkmark and make your device
visible. Your device must be visible to successfully
pair with an external device.
3. Tap
Scan for devices
of discovered in-range Bluetooth devices.)
4.
Tap a device from the list to initiate pairing.
5. Depending on the device, you might have to tap
to accept the passkey (if they match on both
Pair
devices) or enter the passkey or PIN Code.
112 2K. Bluetooth
Discoverable
. (Your device will display a list
6.
Tap if you entered a passkey or PIN
Done > OK
code or passkey.
7.
The external device will then have to accept the
connection and enter your device's PIN code.
Once successfully paired to an external device,
appears within the Status Bar.
Note:
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your LG Optimus S™, but
retains the pairing. At a later point when you wish to
reconnect the device, there is no need to setup the
connection information again.
1.
Verify your Bluetooth is active.