Table of Contents
Advertisement
▲
Loosen the wireless and memory module compartment cover screw (1), and then lift up (2)
and remove the cover (3).
7.
If you are replacing a memory module, remove the existing memory module:
a.
Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
b.
Grasp the edge of the memory module (2), and then gently pull the module out of the
memory module slot.
CAUTION:
edges only. Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
To prevent damage to the memory module, hold the memory module by the
Improving performance
53
Advertisement
Table of Contents
