Epson dreamio EMP-TW500 User Manual page 11

Press and select the colour mode from the six available modes in the selection menu depending on
the place where the projector is being used.
Setting is also possible using the configuration menu.
: Ideal for using in bright rooms.
Dynamic
: Ideal for using in rooms in which the
Living Room
curtains are closed.
: Ideal for using in dark rooms. It is
Natural
recommended that you start in this mode
when making colour adjustments.
If "Natural", "Theatre", "Theatre Black" or "sRGB" is selected, the Epson Cinema Filter will be applied
automatically. This increases contrast and makes flesh tones appear more natural. In addition, if
"Dynamic" or "Living Room" is selected, the Black-White Stretch function will operate to produce
images with greater contrast between lighter and darker shades.
Press and select the aspect mode from the selection menu.
Images from normal
TV broadcasts
Input
Images with standard
signal
aspect ratio (4:3)
Computer images
Recommended
Normal
aspect mode
Result
Black bands will
appear at the left and
right of the images.
When HDTV images
are projected, the
images appear in 16:9
size.
When the input signal resolution is 1280 × 720 or
less and "Through" or "Squeeze Through" is
selected, the images are projected onto the screen
Remarks
with the input signal resolution unchanged, and so
clearer images are projected.
Through
To project images so that they fill the whole of the
screen, use the zoom adjustment or move the
projector further away from the screen.
Theatre
Theatre Black
sRGB
Images recorded by a
video camera or DVD
software in squeeze
mode
Squeeze
Input signals will be Input signals will be
projected at the same projected at the same
width as the projector's height as the projector's
panel resolution. panel resolution.
When 4:3 images are
projected, the images
will be elongated
horizontally.
Squeeze
Through
Basic Image Quality Adjustments
: Ideal for using in dark rooms.
: Ideal for using in rooms blocking light
completely.
: If the connected signal source has an
sRGB mode, set both the projector and
the connected signal source to sRGB.
(Ideal for viewing computer images.)
Letterbox images
Zoom
Input signals will be
projected at the same
height as the projector's
panel resolution. At this
time, the image
enlargement ratio will be
When 4:3 images are
smaller near the middle of
projected, the top and
the images but become
bottom of the images
larger towards the left and
will be truncated.
right edges of the images.
When images with
subtitles are projected
This is useful for when 4:3
and the subtitles are
images are projected onto a
truncated, use the
wide ascreen. Because there is
"Zoom Caption" menu
almost no distortion due to
command to adjust.
enlargement in the middle of
p.19
the images, the images appear
close to what they would be at
their original size. And because
both ends of the images are
enlarged, movement at the
edges of the images appears
faster and gives an impression
of greater speed, making it ideal
for viewing sporting events.
*"Wide" cannot be selected if
keystone correction has been
carried out.
Images from normal
TV broadcasts
Images with standard
aspect ratio (4:3)
Wide
9