Usb Operations - JVC KW-NX7000 Instructions Manual

USB operations

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to
the unit.
• You can also connect the iPod to the USB terminal of the unit. For details of the operations, ☞ pages 99 to 101.
~
Connect a USB device.
The source changes to "USB" and playback starts.
This unit can play JPEG/MPEG1/MPEG2*
2
WAV/AAC* files stored in USB mass storage class
device.
• You can operate the USB device in the same way you
operate the files on discs. (☞ pages 70 to 74, 77, 78,
and 80)
• All tracks in the USB device will be played repeatedly
until you change the source.
• Make sure all important data has been backed up.
1
* Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod>).
2
* This unit can play back AAC files encoded using
iTunes. This unit cannot play back FairPlay-encrypted
files.
USB cable from the rear of the unit
• You cannot connect a computer to the USB (
terminal of the unit.
1
/MP3/WMA/
• Avoid using the USB device if it might hinder your
• Do not pull out and attach the USB device
• Do not start the car engine if a USB device is
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to
• For more details about USB operations,
84
Caution:
safety driving.
repeatedly while "Now Reading..." is flashing on
the monitor screen.
connected.
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
☞ page 117.
)