Epson EMP-800 / 810 Quick Reference Manual page 4

Projecting
Pages 36--38 of User's Guide
Remove the lens cover.
Connect the power cord to the projector.
Connect the power cord to an electrical outlet.
The indicator will light orange.
Turn on the power for the
input source.
In the case of a VCR, press the PLAY button.
Press the button to turn on the
projector's power.
If using the remote control, set
the R/C switch to the ON
position and then press the
button.
will start flashing green and
projection will start.
(Warm-up in progress)
Operation
indicator