Table of Contents
Advertisement
01.
Power (Command:
k a)
To control
Power On/Off
of the TV.
Transmission[k]
[a][]
[Set !D] [ ] [Data] [Cr]
Data 00: Power Off
Data 01 : Power On
Acknowledgemen_ [a][]
[Set ID][]
[OKiNC]
[Data] [x]
* In a like manner, if other functions
transmit 'FF' data
based on this format, Acknowledgement
data feedback
presents status about each function.
* Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input
Select
(Command:
x b)
To select input source for TV.
Transmission [x] [b][
][Set
ID][]
[Data] [Cr]
Data 00: DTV (Antenna)
Data 01 : DTV (Cable)
Data 10: Analog (Antenna)
Data 11: Analog (Cable)
Data 20:AV1
Data 21 : AV2
Data 40: Component
1
Data 41: Component
2
Data 60: RGB-PC
Data 90:HDMI1
Data 91:HDMI2
Data 92:HDMI3
Acknowledgement [b][
][Set ID][
][OK/NG]
[Data] [x]
03. Aspect
Ratio
(Command:
k c)
To adjust the screen format.
TransmiSsion [k] [€][
][Set ID][
][Data]
[Cr]
Data 01 : 4:3
0_.': Just scan
02:16:9
10: Cinema Zoom (1)
04: Zoom
06: Set by program
1f: Cinema Zoom (16)
A_knoWiedgement [€][
][Set
ID][
][0K/NG]
[Data] [x]
04.
Screen Mute
(Command:
k d)
To select screen mute on/off.
TransmiSsiOn[El[d][
][Set
ID][
][Data][Cr]
Data 00: Screen mute off (Picture on), Video-Out Mute Off
Data 01 : Screen mute on (Picture off)
Data 10: Video-Out Mute On
AcknOwledgement[d][
][Set iD][
][OK/NG]
[Data] [x]
* In case of Video-Out
mute on only, TV will display On
Screen Display(OSD).
But, In case of Screen Mute On,
TV will not display OSD.
05. Volume Mute
(Command:
k e)
To control
volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
TransmisSion [k] [e][
][Set iD][
][Data]
[cr]
Data 00: Volume mute on (Volume off)
06.
07.
08.
09.
10.
11.
Data 01: Volume mute off (Volume on)
Acknowledgement [e] [ ] [Set ID] [ ] [OK/NG]
[Data] [x]
Volume Control
(Command:
k f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission[k]
[f'] [] [Set ID] [ ] [Data] [Cr]
Data Min: 00 ~ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. _ p.116.
ACknowledgement[f][]
[Set ID] [ ] [OKiNG]
[Data] [x]
Contrast
(Command:
k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
TransmisSion [k] [g][
][Set
ID][
][Data]
[Cr]
Data Min: 00 ~ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. _ p.116.
Acknowledgemeni [g][
][Set ID][
][OKiNG]
[Data] [x]
Brightness
(Command:
k h)
To adjust screen brightness.
You can also adjust brightness
in the PICTURE menu.
Transmission [k] [h] [ ] [Set lD] [ ] [Data] [Cr]
Data Min: 00 ~ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. _ p.116.
Acknowledgement[h][]
[Set ID] [ ] [OKiNG]
[Data] [x]
Color
(Command:
k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission [k] [i][]
[Set ID] [ ] [Data] [Cr]
Data Min: 00 ~ Max: 64 (*transmit
by Hexadecimal code)
*Refer to 'Real data mapping'. @ p.116.
A_knowledgement[i]
[] [Set ID] []
[OK/NG]
[Data] [x]
Tint
(Command:
k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
TransmisSion [k] [j][
][Set
iD][
][Data]
[Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping'. @ p.116.
ACknOwledgement[)
][]
[set ID][]
[OK/NG]
[Data] [x]
Sharpness
(Command:
k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k] [k][]
[Set ID] [ ] [Data] [Cr]
Data Min: 00 ~ Max: 64 (*transmit
by Hexadecimal code)
_Refer to 'Real data mapping'. _ p.116.
Acknowledgemen_ [k][
][Set
ID][
] [OKiNG]
[Data] [x]
"0
"0
Z
E3
X
117
Advertisement
Table of Contents
