Video Menu (Image Source = Video) - Epson EMP-5500 Owner's Manual

Video Menu (Image source = Video)

The Video menu enables you to make adjustments to the
projected image. The following options are available when the
image source is Video.
Note: The video source (such as a VCR or camcorder) must be
connected and operating, and the image source on the projector
must be set to Video for you to access these menu options.
Menu item
Brightness
Contrast
Color
Tint (NTSC only) Adjust the red-green balance of the screen. Increase
Sharpness
Reset
Description
Lightens or darkens the overall image. Increase
brightness to make the image lighter, or decrease it to
make the image darker.
Adjusts the relative difference between light and dark
areas. Increase contrast to make light areas lighter
and dark areas darker, or decrease it to lessen the
difference between the light areas and dark areas of
the image.
Adjusts color density. Increase color density to make
colors darker and more opaque, or decrease it to
make colors lighter and less opaque.
tint to add more green, or decrease it to add more red.
Adjusts screen sharpness.
Increase sharpness to make screen images more
sharp, or decrease it to make the images less sharp.
Returns all Video Menu items to their factory defaults.
Select this item and then press either multi-purpose
button(remote) or the <Enter> button(operation panel)
to display the confirmation screen. Next, select Yes
and then press a multi-purpose button(remote) or the
<Enter> button(operation panel) to reset the Video
Menu items. If you change your mind, select No and
then press either multi-purpose button(remote) or the
<Enter> button(operation panel) to clear the
confirmation screen without changing any settings.
Changing a Menu Setting 41