Pip Operation; Introduction; Pip Functions - Zenith SR3543 Operating Manual & Warranty

PIP OPERA TION
INTRODUCTION
Your TV must be connected to two separate sources in
order to view a different picture in the PIP inset from that
which is showing in the main picture area of the TV. One
source (such as an antenna) must be connected to the ANT/
CABLE 1 or 2 jack. The other source (such as a VCR) must
be connected to the VIDEO 1 or 2 jacks.
The most common use of PIP is to view two different chan-
nels; one from the channel selector of the TV and the other
from the channel selector of the VCR. For example, you can
view two spoI_tingevents or two movies at the same time.
SELECTING MAIN PICTURE AND PIP INSET SOURCES
[.al°Sou. J [ P,PSou.ce I
Ant/Cable 1
Ant/Cable 2
Video 1
Video 2
S-Video 1
_ Main/PIP
Ant/Cable 1
Video 1
Video 2
S-Video 1
Select Source I
q',l, To
-- Source of main
picture
Source of PIP
Main Source
• Make sure remote is in TV
mode.
• Press SOURCE on your re-
mote to view the Source
Menu.
• Press SOURCE repeatedly to
select the source which corre..
spends to the jack on the TV
connection panel that is recei v-
ine the input signal.
• Press QUIT to remove the
menu.
PIP Source
• Make sure remote is in TV
mode.
• Press SOURC, E on your
remote to view the Source
Menu.
• Press the Left or Right key to
select PIP Source column.
• Press SOURCE repeatedly to
select the source which
corresponds t_ the jack that is
receiving the PIP input signal.
• Press QUIT to remove the
menu.
PICTURE-IN-PICTURE FUNCTIONS
PIP
Press the PIP key to display the PIP inset. Press it again to re-
move the PIP inset.
Moving the PIP Inset
Use the Left/Right and Up/Down arrow keys to move the PIP
inset to the desired corner of the TV screen.
SWAP
Press SWAP to swap the main
picture with lhe PIP inset.
Press SWAP again to return to
the original display.
AIN PICTURE
PIP Size
Select PIP Size in the PIP Menu to choose between seeing a
:;mall or large PIP inset.
FREEZE
:Press FREEZE to freeze motion of the picture shown in the
PIP inset. Press FREEZE again to return to a live PIP inset,
SWAP
PIP
FREEZE
SOURCE
I
PIP Buttons
(Typical Remote Control; your remote
may differ from unit shown.)
:z91s-o 10 -- 1