Safety Decals Found On Your Unit - Cub Cadet Commercial 1536H Operator's And Service Manual

14. If you hit a solid object while mowing, disengage the blade clutch, place the ground speed control levers in neutral, place
the neutral latch levers in the neutral lock position and stop the engine. Disconnect the spark plug wire and inspect for
damage. Repair any damage and make sure the blades are in good condition and the blade bolts are tight before
restarting the engine.
15. Do not mow excessively steep slopes. Mow across the slope, not up and down the slope.
16. Never raise the mower deck while the blades are rotating.
17. Never walk or stand on the discharge side of a mower with the engine running. Disengage the blade clutch if another
person approaches while you are operating a mower.
18. Always disconnect the spark plug wire to prevent the engine from accidentally starting before performing any maintenance
on this mower.
19. Keep the mower and especially the engine/pump area clean and free of grease, grass and leaves to reduce the chance of
fire and to permit proper cooling.
20. The operator presence control levers located at each handle are designed for your safety. Do not try to defeat their
operation. If the blade clutch is engaged or either of the ground speed control levers are out of the neutral position,
releasing both handles will shut off the mower's engine.
SECTION 4: SAFETY DECALS FOUND ON YOUR UNIT
Keep safety decals clean. Replace any safety decal that is damaged, destroyed, missing,
painted over or can no longer be read. Replacement safety decals are available through your
dealer.
WARNING
OPEN BELT DRIVE
STOP ENGINE BEFORE
REACHING UNDERNEATH
SHIELD MISSING
DO NOT OPERATE
Do not operate without discharge deflector
or entire grass collection system in place.
Do not remove grass catcher until blades
have stopped.
WARNING
5
WARNING