Acpi Configuration; Ahci Configuration; Apm Configuration; Event Log Configuration - Zotac IONITX-N series User Manual

q nVidia RAID Setup
This item allows you to set the nVidia RAID mode.
q Serial-ATA Pri/Sec Master/Slave Channel
This displays the status of auto detection of SATA channel.
q Hard Disk Write Protect
This will be effective only if device is accessed through BIOS.
q IDE Detect Time Out
The item allows you to select the time out value for detecting ATA/ATAPI devices.
q ATA(PI) 80pin cable detection
The item allows you to select the mechanism for detecting 80pin ATA(PI) cable.

ACPI Configuration

The items in this menu allow you to set General ACPI Configuration, Advanced ACPI
Configuration and Chipset ACPI Configuration.

AHCI Configuration

The items in this menu allow you to set general AHCI configuration.

APM Configuration

These items allow you to configure Advanced Power Management.

Event Log Configuration

Make as read,clear,or view Event log statistics.

MPS Configuration

The items in this menu allow you to select MPS revision.

PCI Express Configuration

The items in this menu allow you to enable or disable PCI Express L0S and L1 link
power states.

Smbios Configuration

SMBIOS SMI wrapper support for PnP Function 50h-54h.

USB Configuration

The items in this menu allow you to change the USB-related features .Press <enter>
To display the configuration options:
q Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
q USB 2.0 Controller Mode
Allows you to configure the USB 2.0 controller in HiSpeed or Full Speed .
q BIOS EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-off
feature.
Configuring the BIOS
21