Setting Up The Zotac Zbox Blu-Ray - Zotac ZBOX User Manual

ZOTAC ZBOX Blu-ray

Setting up the ZOTAC ZBOX Blu-ray

Please connect the peripherals before using the ZOTAC ZBOX Blu-ray.
1
2
3
4
4
1. Connecting to USB 3.0 device
Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to
the USB 3.0 port on the system rear panel.
2. Connecting to a home network
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
3. Connecting to an eSATA or USB device
Connect one end of an eSATA device or USB 2.0 device to the combo eSATA / USB
2.0 port.
4. Connecting to a DVI or VGA display
Connect one end of a DVI/VGA cable to an HDTV or monitor, and the other end
to the DVI port on the system rear panel. If using a VGA connection, please use
included DVI-to-VGA adapter.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to the HDMI port on the system rear panel and
the other end to a HDMI-compatible display such as an HDTV or monitor
6. Connecting to an optical S/PDIF device
Connect the S/PDIF output from the ZBOX Blu-ray to a S/PDIF input device such as
a home theater receiver or digital speakers for digital audio transfer.
7. Connecting to a Kensington safety lock
Connect Kensington Safety Lock to ZBOX Blu-ray and lock.
8. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
Note: When your ZOTAC ZBOX Blu-ray is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.
16
5
7
6
8