Spark Arrester Cleaning - Yamaha BLASTER YFS200N Owner's Manual

EBU00458

Spark arrester cleaning

Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the screw.
q
1. Screw (×3)
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe.
e
1. Tailpipe
2. Spark arrester
3. Gasket
4. Make sure the gasket is properly posi-
tioned, then insert the tailpipe into the muf-
fler and align the screw holes.
5. Install the screw and tighten it.
8-11
q
w