Craftsman 917.389390 Owner's Manual page 5

HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so
as not to pinch or damage control cables.
• Raise lower handle section to operating
position and squeeze the bottom ends
of lower handle towards each other
until the pin in handle can be inserted
into one of the three height adjustment
holes.
• Remove protective padding, raise upper
handle section into place on lower
handle and tighten both handle knobs.
• Remove any packing material from
around control bar.
• Your handles may be adjusted for your
mowing comfort. Refer to Service and
Adjustments section of this manual.
Operator presence
control bar
Upper handle
Lift up
Lower handle
3-position
Handle
asjustment
bracket
Handle
pin
J
Liftup
g position
TO INSTALL ATTACH M ENTS
Your lawn mower was shipped ready to
be used as a mulchero To convert to
bagging or discharging, see "To convert
mower" in the OPERATION section of this
manual.
5