Projector Care; Cleaning - Epson 1EMP-S1 User Manual

Appendices

Projector Care

Be sure to read the separate "Safety Instructions/World-Wide
c
Warranty Terms" before proceeding.

Cleaning

You should clean the projector if it becomes dirty or if the projected
image starts to deteriorate.
f Cleaning the projector case
Clean the projector case by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water
containing a small amount of (ph) neutral detergent, and then firmly wring
the cloth dry before using it to wipe the projector case. After you have
done this, wipe the projector another time with a soft, dry cloth.
Do not use volatile substances such as wax, alcohol or thinner to
c
clean the projector case. These can cause the case to warp and
make the surface coating peel off.
f Cleaning the lens
Use a commercially-available air blower, or lens cleaning paper to gently
wipe the lens.
As the lens can be easily damaged, do not rub the lens with
c
harsh materials or subject the lens to shocks.
EMP-S1 User's Guide
53