Turning the Projector On and Off
Turning On the Projector
1. Remove the lens cap.
2. Turn on any connected equipment you plan to use.
3. Turn on the main power switch on the back of the projector.
Power switch
4. Press the
button on the remote control or the P
button on the projector.
On
Power
Turn on the projector
Note: To prevent children from turning on the projector, you can use the Child Lock. See page 32
for details.
If you'll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 45 for
details.
The projector takes about 30 seconds to warm up and display an image. If you don't see a
picture, you may need to change the image source as described on page 23.
22
Setting Up the Projector