Adjusting The Volume; Turning Off The Picture And Sound; Freezing The Action - Epson 10 Owner's Manual

2. If your image looks like
buttons on the projector's control panel until the image is
corrected.
Note: You can only correct vertical distortion with this
function. Also, the screen image becomes smaller when you
perform keystone correction.
If the images become uneven in appearance, decrease the
setting in the projector's Picture Quality menu.
Sharpness
3. Rotate the focus ring to sharpen the picture, or the zoom
ring to reduce or enlarge it.
4. To optimize color settings, press the
the remote control to choose from these four pre-set color
modes:
❏
Dynamic
Images are modulated and made crisper to emphasize
brightness and increase color intensity. This is
❏
Living Room
Ideal for projecting images or playing video games in
rooms with a lot of ambient light.
❏
Theatre
For projecting movies or images with dark tones. This is
the default color mode for component video sources.
❏
Theatre Black
For projecting movies or images in a dark room; lamp
brightness decreases and image contrast increases.
5. To change the picture's aspect ratio (ratio between length
and height), press the
Aspect
to move through these options:
❏
Normal
Maintains the aspect ratio of the image source and the
projected image on a 16:9 (wide-screen format) screen;
when images output in 4:3 format are projected, black
bands appear on the sides, but the image's normal aspect
ratio is maintained.
or , press the and
Zoom lever
Focus
lever
button on
Color Mode
button on the remote control
EPSON PowerLite Home 10 Projector
❏
Squeeze
Best for projecting wide-screen format (16:9) images;
when images output in 4:3 format are projected, they are
elongated horizontally.
❏
Zoom
Crops images ouput in 4:3 format at the top and bottom
and projects them in 16:9 format.
Note: Standard images have an aspect ratio of 4:3, and
HDTV and DVD images have an aspect ratio of 16:9.

Adjusting the Volume

Use the buttons on the projector's control panel or remote
control to adjust the volume of the projector's audio system or
speakers connected directly to the projector's
❏ Press the
button to decrease the volume.
❏ Press the
button to increase the volume.

Turning Off the Picture and Sound

You can use the
A/V Mut
darken your screen and turn off the sound. This is useful if you
pause the video. When you're ready to resume, press
again.
Use your video equipment's controls to pause the video. If you
don't pause it, it continues to play even though you can't see or
hear it. When you press the
won't resume exactly where you stopped it.

Freezing the Action

To freeze the action temporarily on the screen, press the
button on the remote control. This freezes any moving images
until you press the
Still
Like the feature, the video and audio input continue
A/V Mute
while the moving images are paused, so when you press the
button again, playback doesn't resume exactly where you
stopped it.
7/03 EPSON PowerLite Home 10 Projector - 5
Audio
e button on the remote control to
button again, playback
A/V Mute
button again.
ports:
A/V Mute
Still
Still