Connect anti-sway bar to chassis brack-
et under left footrest and retain with
double loop retainer spring.
o Turn height adjustment
knob clockwise
to remove slack from mower suspen-
sion°
- Raise mower to highest position.
o Assemble gauge wheels (See "TO
ADJUST GAUGE WHEELS" in the
Operation section of this manual).
CHECK MOWER
LEVELNESS
For best cutting resultsLrnower should be
properly leveled. See %0 LEVEL
MOWER
HOUSING" inthe Service and
Adjustments section of_!his manual.
Chassis
Shoulder
Bracket
Bolt
'
Double Loop
Retainer Spring
(Inward pointing
deck pins)
CHECK FOR PROPER POSITSON OF
ALL BELTS
See the figures that are shown for replac-
ing motion, mower drive, and mower blade
drive belts in the Service and Adjustments
section Ofthis manual. Verify that the
belts are routed correctly.
Suspension
Arms
Front
Brackets
Front Mower
Bracket
Electric
Clutch
Front
Gauge
Wheel
3/8 Washer
3/8-16
Center
Lockrlu_.
Use Pliers for
:letainer Springs
!
Double Loop
Retainer Sp.ring
Anti-Sway
Bar
Idler
Pulley
Discharge Guard
Single Loop
Retainer Springs
10