Rgb Adjustment (Offset, Gain); Selecting The Color Gamut - Epson EH-TW5500 User Manual

Advanced Color Adjustments

RGB adjustment (Offset, Gain)

The image brightness can be adjusted by adjusting
the individual R (red), G (green) and B (blue)
components of the dark areas (offset) and bright
areas (gain).
Adjustment is not possible when "Color Mode" is
set to "x.v. Color".
Offset
If you would like dark areas to appear more clearly,
change the setting to the + (right) side. If you
change it to the – (left) side, the whole image will
become sharper, but the contrast in dark areas will
become poorer.
Gain
If you would like bright areas to appear more
clearly, change the setting to the – (left) side. If
you change it to the + (right) side, you will feel
that the image is becoming brighter and closer to
white, but the contrast in light areas will become
poorer.

Selecting the color gamut

The setting values for providing the color
gamut that matches the specifications for the
equipment being used have been recorded. You
can change the color gamut easily just by
selecting a setting from the menu.
This setting is only possible when "Color
Mode" is set to "Natural".
22
Press
"Image" - "Advanced" - "RGB" in that
order and confirm the selection.
Use
select an item, and then use
(LEFT or RIGHT) to make the
adjustment.
To return the adjustment results to their
RGB adjustment (Offset, Gain)
default settings, press
Press
Selecting the color gamut
Press
"Advanced" - "Color Gamut" in that order.
Select "HDTV", "EBU" or "SMPTE-C"
depending on the equipment being used.
Press
and then select
or (UP or DOWN) to
or
.
to exit the menu.
, and then select "Image" -
to exit the menu.