Download Print this page

Craftsman 917.28863 Operator's Manual page 24

Lawn tractor 26.0 hp, 54" mower electric start automatic transmission
Hide thumbs Also See for 917.28863:

Advertisement

Available languages

Available languages

ENGINE OIL FILTER
Replace the engine oil fflter every season or
every other oil change if the tractor is used
more than I00 hours in one year,
AIR FILTER
Your engine will not run properly usinga
dirty air filter. Clean the foam pre-cfeaner
after every 25 hours of operation or every
season. Service paper cartridge every
100 hours of operation or every season,
whichever occurs first.
Service air cleaner more often under dusty
conditions.
1. Remove cover.
TO SERVICE PRE-CLEANER
2. Wash it in liquiddetergent and water.
3. Squeeze it dry in a clean cloth.
4. Saturate it in engine oil, Wrap it in
clean, absorbent cloth and squeeze to
remove excess oil.
NOTE: If very dirty or damaged, replace
pre-cleaner.
TO SERVICE CARTRIDGE
1. Clean cartridge by tapping gently on
flat surface. If very dirty or damaged,
replace cartridge.
2. Reinstall precleaner cartridge, cover
and secure.
IMPORTANT: Petroleum solvents, such
as kerosene, are not to be used to clean
the cartridge, They may cause deteriora-
tion of the cartridge. Do not oil cartridge.
Do not use pressurized air to clean or dry
cartridge.
_
Cartridge
Foam
_
Pre-Cleaner__
CLEAN AIR SCREEN
Air screen must bekeptfree ofdirt and chaff
to prevent engine damage from overheating.
Clean with awire brush or compressed airto
remove dirt and stubborn dried gum fibers.
CLEAN AIR INTAKE/COOLING AREAS
To ensure proper cooling, make sure the
grass screen, cooling fins, and other exter-
nal surfaces of the engine are kept clean
at all times.
Every 100 hours of operation (more often
under extremely dusty, dirty conditions),
removethe blower housing and other cooling
shrouds. Clean the cooling fins and external
surfaces asnecessary. Make surethe cooling
shrouds are reinstalled.
NOTE: Operatingthe engine with ablocked
grass screen, dirty or plugged cooling fins,
and/or cooling shrouds removed will cause
engine damage due to overheating.
MUFFLER
inspect and replace corroded muffler and
spark arrester (ifequipped) as it could create
a fire hazard and/or damage.
SPARK PLUG(S)
Replace spark plug(s) at the beginning of
each mowing season or after every 100
hours of operation, whichever occurs first.
Spark plug type and gap setting are shown
in "PRODUCT SPECIFICATIONS" section
of this manual.
IN-LINE
FUEL FILTER
The fuel filter should be replaced once each
season.
If fuel filter becomes
clogged,
ob-
structing fuel flowto carburetor, replacement
is required.
1. With engine cool, remove filter and plug
fuel line sections.
2. Place new fuel filter in position in fuel line
with arrow pointing towards
carburetor.
3. Be sure there are no fuel line leaks and
clamps
are properly positioned.
4. immediatelywipe
upanyspilled
gasoline.
Clam____amp
Fuel Filter ---.---__
24

Advertisement

loading