General Recommendations; Before Each Use - Craftsman 917.28827 Operator's Manual

MAINTENANCE
BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE
EACH 8 25 50 100 REASON STORAGE
SCHEDULE
USE HOURS HOURS HOURS HOURS
3heck Brake Operation
3heck Tire Pressure
:heck Operator
Presence& ROS
System
2,heck for Loose Fasteners
Dheck/Replace Mower Blades
_ubrication Chart
2,heck Battery Level
Dlean Battery and Terminals
3heck Transaxle Cooling
2,heck Mower Levelness
i/
i/
2,heck V-Belts
Check Enqine Oil Level
:han qe Enqine Oil (with oil filter
_,hange Engine Oil (without oil filter
Clean Air Filter
:lean Air Screen
nspect Muffler/Spark Arrester
qeplace Oil Filter (If equipped)
:lean Engine Cooling Fins
qeplace Spark Plug
_eplace Air Filter Paper Cartridge
_1,2
v"
qeplace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusly conditions.
V"
v"
¥,
_2
3 - Replace blades more often when mowing in sandy soil.
4 - Not required it equipped with maintenance-tree battery.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
_0 Spindle _
Zerk _ ................
(i_ Front Wheel,_
Bearingzerk_ _ :_:
_f) Steering -_ L_ I1_" ill
Sector Gear
Teeth _
F
Spindle
Zerk
Front Wheel
Bearing zerk
Engine
_.bGeneral Purpose Grease
@Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
16