Flash Key - Aastra 6757I User Manual

Flash Key

You can set a key to generate a flash event when it is pressed on the 6757i. You do this by setting
the key to "flash". The IP phone generates flash events only when a call is connected and there is
an active RTP stream (for example, when the call is not on hold).
Configuring a Flash Key
Aastra Web UI
Use the following procedure to configure a Flash key on the 6757i IP Phone. The procedure
shows the softkey screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select "Flash".
4. In the "Label" field, enter a label to display on the phone for the key.
108 Model 6757i IP Phone User Guide