Gigabyte GA-MA790FX-DS5 User Manual page 84

For example, if you wish to create RAID with hard drives on the GSATAII_1 and GSATAII_2 connectors,
ensure that Onboard GSATA-II Ctrl is enabled. Set Onboard GSATA-II Ctrl Mode to RAID (Figure
2). If you do not want to create RAID, set this item to IDE or AHCI, depending on your need.
Onboard LAN Function
Onboard LAN Boot ROM
SMART LAN
Onboard ESATA-II Ctrl
Onboard ESATA-II Ctrl Mode
Onboard GSATA-II Ctrl
Onboard GSATA-II Ctrl Mode
: Move Enter: Select
F5: Previous Values
For example, if you wish to create RAID with hard drives on the eSATA 3Gb/s ports, ensure that
Onboard ESATA-II Ctrl is enabled. Set Onboard ESATA-II Ctrl Mode to RAID (Figure 2). If you do
not want to create RAID, set this item to IDE or AHCI, depending on your need.
Onboard LAN Function
Onboard LAN Boot ROM
SMART LAN
Onboard ESATA-II Ctrl
Onboard ESATA-II Ctrl Mode
Onboard GSATA-II Ctrl
Onboard GSATA-II Ctrl Mode
: Move Enter: Select
F5: Previous Values
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
GA-MA790FX-DS5 Motherboard
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
OnBoard PCIE Device
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
OnBoard PCIE Device
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[IDE]
[Enabled]
[RAID]
F10: Save
Figure 2
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[RAID]
[Enabled]
[IDE]
F10: Save
Figure 2
- 84 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults