Cutting Height - Craftsman 917.376430 Owner's Manual

Ez3
Table of Contents

Advertisement

OPERATmON
MULCHING
IVlOWRNGTIPS
IMPORTANT:
FOR BEST
PERFORMANCE,
KEEP
MOWER HOUSING FREE OF BUILT-UP GRASS AND
TRASH_
SEE
"CLEANING"
IN
CUSTOMER
RESPONSIBILITIES
SECTION OF THIS MANUAL.
The special mulching blade will recut the grass clip-
pings many times and reduce them in size so that as
tahedY fall onto the lawn they will disperse into the grass
not be noticed.
Also, the mulched grass will
biodegrade
quickly to provide nutrients for the lawn.
Always mulch with your highest engine (blade) speed
as this will provide the best recutting action of the
blades.
Avoid cutting your lawn when it is wet. Wet grass tends
to form clumps and interferes with the mulching action°
The best time to mow your lawn is the early afternoon.
At this time the grass has dried and the newly cut area
will not be exposed to the direct sun.
For best results, adjust the lawn mower cutting height
so that the lawn mower cuts off only the top one-third
of the grass blades (See Fig. 10)o If the lawn is
overgrown it will be necessary to raise the height of cut
to reduce pushing effort and to keep from overloading
the engine and leaving clumps of mulched grass_ For
extremely heavy mulching, reduce your width of cut by
overlapptng previously cut path and mow slowly,
=
Certain types of grass and grass conditions may re=
quire that an area be mulched a second time to com-
pletely hide the clippings.
When doing a second cut,
mow across or perpendicular
to the first cut path.
Change your cutting pattern from week to week. Mow
north to south one week then change to east to west the
next week_ This will help prevent matting and graining
of the lawn_
MAX 1/3
FIG. 10
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ez3 917.376430

Table of Contents