Zenith SLV1340S Operating Manual & Warranty page 32

SUPER HIGH SPEED SEARCH
(I_P/SLP MODE)
For Visual Search in super high speed, press either
EFWD or REW button while the unit is in the Play
mode. Then press again. The unit will now search
in super high speed. Press once more either EFWD
o1: REW button back to high speed search. For
normal playback, simply press PLAY button.
Note: Tape recorded in the LP, SLP mode will
display a noise bar on the TV screen and the
picture may revert to Black and White. This is
normal.
STILL FRAME DURING PLAYBACK
If you press PAUSE/STILL button during play-
back, the picture will "freeze" on the TV screen.
Only recorded tape in SLP mode shows clear pic-
ture. You may use this feature to study details of a
particular screen. Press PLAY button again to con-
tinue playback. If noise lines appear, see Note
under Slow Tracking below.
Note: The TV/VCR will automatically switch to
the Stop mode, if it is left in the Pause mode for
more than five minutes.
SLOW MOTION
Press SLOW button to reduce the playback speed.
The VCR mutes the sound during slow motion.
* Press PLAY button to return to normal play-
back.
Slow Tracking
You can reduce the noise lines by pressing CH.
button ("A" or "_'") in slow mode, too. But you
cannot set center position in slow mode, and
slow tracking adjustment will not be set auto-
matically.
Note: Press SLOW button in Still mode and
press CH. button ("A" or "T") until you obtain
a noise free picture. To return to Still mode,
press PAUSE/STILL button again.
VERTICAL HOLD CONTROL
Adjust to stabilize the picture when picture begins
to vibrate.
This adjustments; works only in the Still mode
with CH A or v bulion.
TRACKING ADJUSTMENT
When playing pre-recorded tapes or tapes re-
corded on units other than your own, noise lines
(black and white streaks) may appear on the play-
back picture. If this occurs, adjust the TRACKING
control by pressing CHANNEL "A" or "T" button
until the streaks disappear.
To set to center position, press both CHANNEL
"A" and "Y" buttons at the same time. (This fl_nc-
tion is operative only by buttons on Main Unit.)
• CHANNEL •
-- SET -Jr
Main unit
'_ CH./SET A
Rernote control unit
DEGAUSS
Magnetism from nearby appliances might affect
the color of the TY picture. If this happens, move
this unit away from the appliance. If the color is
still not correct, disconnect power cord from AC
outlet then reconnect it after 30 minutes over.
- 32 -