Advertisement
L
w
w
L
F
Refer to the chart on page 39/40
to find the type and brand name
of the device you're programming.
Press and hold the PRGkey until
the indicator tight turns on, then
re|easether PRGkey.
Press the AUX key and the 1 on
the NUMBER key pad at the same
time (for AUX+1).
Usingthe NUMBER key pad, enter
the three-digit code for the
deviceyou've selected.
PressENTER to savethe code.
With the device turned on, point
the remote at it and press
POWER. I t shou|dturn off.
Repeatthe stepsfor AUX+2,and
AUX+3.
Programming
your Zenithremote
willallow you to useoneremote
to work up to 7 rh't_erent products
or devices.
Somedevicesmay not workwith
your Zenith remotecontToL
REMOTE I
REMOTE PROGRAMMING
I PAGE
0
\
Controlup
to seven
different
deviceswith
your remote!
37
AUX
Auxi|iaryequipment. Can be any equipmentwhich doesnot have a dedicatedkey on the remoteEke cable or VCR.
TypicaLLy a secondVCR,stereo system,audiotape deck, etc.
3374-0
Advertisement
