Moderator's Password Setting Up; Unregister Moderator Status - Sanyo WXU30 - PLC - LCD Projector Owner's Manual

Chapter 8 Network capture functions

Moderator's password setting up

This enables you to set up the password to join in the moderator's group.
Start up the network Capture 4 and click
erator function setting item on the parameter set up window, set up the password of
word
. Up to 15 characters can be used for the password. Default password is blank.
Following password input window appears on the screen when the client clicks
button on the application window to join in the moderator's group.
Enter a password and click
the moderator's group. The input password is registered in the moderator's password of the client.

Unregister moderator status

1. Select the projector(s) which is registered as a moderator from the moderator mode application win-
dow.
2. Click the Delete moderator's group button. Selected projector will be unregistered on a moderator,
and the application window changes "Normal mode". The column of status changes from "#On Mod-
erating" to "On Standby". When there are multiple projectors to unregister, the application window
maintains "Moderator mode" until all the registered moderator's groups are unregistered.
✳ Even after the moderator is unregistered, the application window of the Network Capture 4 appears
on the screen to indicate that the moderator function is unregistered.
✳ After terminating the Network Capture 4, all the clients joined in the session will be unregistered.
106
Parameter set up
OK
button. When the password is authenticated correctly, the client can join in
button on the application window. On the mod-
Join moderator's group
Moderator 's pass-