Removal steps of power board
1
Remove the screw
and then remove the power board
Step
Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (1)
1130 Microphone assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 44
•
"1020 Bottom slot cover" on page 44
•
"1030 Optical drive" on page 45
•
"1090 Keyboard" on page 51
•
"1100 Keyboard bezel" on page 54
Removal steps of microphone assembly
Detach the connector
1
When installing: Ensure that the connector is attached firmly to the system board.
58
Hardware Maintenance Manual
, and then remove the microphone assembly in the direction shown by the arrow
2
.
Color
Black
Torque
1.85 kgf-cm
2
.