Printing on Envelopes
You can load up to 10 envelopes at a time. Follow these steps to print on No. 10 size
envelopes:
1. Load the envelopes short edge first against the right edge of the sheet feeder,
behind the tab. The printable side should be up, and the flap side should be down
and on the left.
2. Press in the locking tab on the left edge guide and slide it against the envelopes.
3. In your application software, set a left margin of approximately 3 inches. Set a top
margin of approximately 2 inches. Then type the address.
4. Open your printer software and make the following settings:
I
For Paper Type (Windows) or Media Type (Macintosh), select
I
For Orientation, select
I
For Paper Size, select
Macintosh OS X) or
Landscape
Envelope #10 (4 1/8 × 9 1/2 in)
(Macintosh OS 8.5.1 to 9.x).
Envelope #10
Load the printable
side up and the flap
side down
Plain Paper
(Windows and
Printing From Start to Finish
20