Panasonic Viera TC-P50C2 Operating Instructions Manual page 31

(Continued)
When using Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to the
appropriate input, when playback begins on one of those devices•
® For a Home theater system the speakers automatically switch to the theater system.
When "Yes" is selected (p• 27), TV is turned on automatically and switches to the appropriate HDMI input whenever a
VIERA Link compatible equipment is initially turned on and the Play mode is selected.
When "Yes" is selected (p. 27) and the TV is turned off, all connected VIERA Link compatible equipment is also
automatically turned off.
® A Panasonic DVD Recorder will not turn off if it is still in rec mode.
Caution: The TV remains on even if the VlERA Link compatible equipment is turned off.
® Condition
Power off link: Yes; Energy saving mode: Quick start
The equipment has "HDAVl Control 4 or later (with Quick Start mode)" connected with an HDMI cable•
When TV is turned off, all connected VlERA Link compatible equipment is moved to ECO standby mode * automatically
under above conditions•
Minimum power consumption of standby condition for the equipment.
® Condition
Unselected device energy save: Yes
The equipment has "HDAVl Control 2 or later" (for available equipment only) connected with an HDMI cable.
[ Examples of timing for operation ]
• When the input is switched from the HDMI.
• When the "Speaker output" is changed from "Home theater" to "TV".
The connected Vl ERA Link compatible equipment will be turned off automatically when not in use.
"TV" is the default setting• To set the Home Theater system as Default speakers, change the Default speakers setting
from "TV" to "Theater". Sound will be output from the Home Theater whenever the TV is powered on.
If the "ON E TOUCH PLAY" key is pressed on the remote control for a Panasonic Home Theater system, the following
sequence of operations is performed automatically•
_# Home Theater power switches On, and playback begins.
42)TV power switches On, and the playback screen is displayed.
_3_ Audio is muted on the TV and switches to the theater system.
The following information about the TV settings can be transmitted to each piece of an equipment (Recorder/Home
theater/Player) that has "HDAVl Control 3 or later" function connected to a TV with HDMI cable.
Transmittable data Recorder Home theater Player
_1_ On Screen Display Language setting O O O
(EnglishlEspahollFranqais)
_2)Panel Aspect Ratio
(1 6:9 fixed) O O O
C3)Closed caption information
(Mode/CC type/Digital setting) O ......
(_ Channel information
(Input signal/Channel list/Caption information) O ......
® There is a possibility that all the GUI language information might be set from the equipment, that has an HDMI CEC
function connected to the TV with an HDMI cable. Depending on the operating conditions or the specification for
each piece of equipment the setting may or may not be applied•
® For more details on the external equipment's operation, please refer to the operating manuals for the equipment.
[For Recorder]
® You cannot operate other functions while transmitting TV's information above except Power On/Off key operation.
When you turn off this unit, the transmission will be interrupted (only when you are transmitting (@Channel information).
Minimizes lip-sync delays between the picture and audio when you connect to a Panasonic theater system or
Amplifier.
@
i
r-m
3>
_q.
<>
i
db
©
S
31