Set-Up Button; Auto Programming; Manual Programming - Panasonic CT-9R10T Operating Instructions Manual

Set-Up Button
• AUTO PROGRAM
• MANUAL PROGRAM
• ANTENNA (TV or CABLE)
• LANGUAGE (ENGLISH or ESPAI_OL)
Auto Channel Programming - This feature
allows you to place all channels with a Video signal into
Channel Scan Memory (all channels with a signal will be
indicated in Blue). Press CH UP or DOWN button (while
On-Screen Menus are not displayed) and only those
channels with a signal will be accessed.
1, Press the SET-UP button to access intothe Set-Up
Menu.
SET-UP
2. PresstheCHUPorDOWN buttontoselecttheAuto
Program Menu.
2.
,
Press the CH UP or DOWN button to select the
Manual Prog (Manual Programming) Menu.
Selects Desired
Feature When
Menu is Displayed
MANUAL PROG NO I
Press the VOL LEFT or RIGHT button to display
Manual Programming Sub Menu.
Selects Desired
Feature When
Menu is Displayed
ENTER CH 05
,TO DEL _'TO ADD
AUTO PROGRAM NO
3. Press the VOL LEFT or RIGHT button to start AUTO
PROGRAMMING, Channels will automatically
advance until all channels have been scanned.
NOTE: To defeat once started, press any other button
and the feature stops with all previous channels
programmed into Channel Memory.
Manual Program
- This feature allows you to select
which channels are placed into Channel Scan Memory.
1. PresstheSET-UPbuttontoaccessintothe Set-Up
Menu.
SET-UP
.
5.
-11 -
Press the CH UP or DOWN button or use the
Remote Control Keyboard "0" through "9" buttons to
select channels while the Sub Menu is displayed.
To Select
Channels
Press the VOL LEFT to delete channel(s) from
memory (Yellow). Press the VOL RIGHT to add
channel(s) to memory (Blue).
To Add
Channels
6. Repeat steps 4 and 5 to continue adding and
deleting channels.
7. Press the SET-UP button to exit the Manual
Programming Sub Menu.