NEC PE401H User Manual page 25

Introduction
 When "Power-
Saving" is selected for
"Standby Mode" from
the menu, the projector
cannot be controlled
via the computer cable
(VGA), serial cable or
network (wired LAN)
connection.
English ... 18
TIP:
• When Virtual Remote Tool starts for the first time, "Easy Setup"
window will be displayed to navigate your connections.
Step 3: Start Virtual Remote Tool
Start using the shortcut icon
Start from the Start menu
Click [Start] -> [All Programs] or [Programs] -> [NEC Projector
User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote
Tool].
When Virtual Remote Tool starts for the first time, "Easy Setup"
window will be displayed.
Follow the instructions on the screens.
When "Easy Setup" is completed, the Virtual Remote Tool screen
will be displayed.
TIP:
• The Virtual Remote Tool screen (or Toolbar) can be displayed without
displaying "Easy Setup" window.
To do so, click to place a check mark for "Do not use Easy Setup next time"
on the screen at Step 6 in "Easy Setup".