LG 42PX3DBV Owner's Manual page 41

Programming the Remote
Prog ram mi ng the
G The remote control is a multi brand or universal remote control. _t can be pr_rammed to operate most rerr#te4-.,ontroltable
devices of other manufacturers
Note th_ the remote control may net control all rr#de_s of other brands.
1 Test your remote control
To find out whether your remote contro_ can operate the component without programming, turn on the component such as a VCR
and press the corresponding MODE button (VCR) on the remote control, _ile pointing at the component
2, Turn on the component to be programmed then press the corresponding MODE button on the remote control
3. Press the MENU and MUTE buttons simuffaneously, the remote control is ready to be programmed for the code.
4. Enter a code number using the number buttons on the remote. Programming code numbers for the corresponding component can
be found on the following pages. Again ff the code is correct, the _vice will turn off.
5. Press the MENU button to store the code.
6. Test the remote control functions to see if the component responds proper_y, if not, repeat from step 2_
Owner's Manual 41