Charging The Battery - Panasonic SDR-S70 Operating Instructions Manual

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before
using this unit.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always "live" as long as the AC adaptor is connected to an electrical outlet.
≥ The battery will not be charged if the power is turned on.
≥ It is recommended to charge the battery in a temperature between 10 oC to 30 oC.
(The battery temperature should also be the same.)
1
Connect the AC adaptor to this unit's DC input terminal.
2
Connect the AC cable to the AC adaptor, then the AC outlet.
≥ For the AC cable, plug in
≥ The status indicator A will flash red at an interval of 2 seconds, indicating that charging has begun.
∫ Connecting to the AC outlet
If you turn on this unit while charging the battery using the AC adaptor, you can use the
power supplied from the AC outlet to power the unit for use.
≥ We recommend using Panasonic batteries (l 7, 13).
≥ If you use other batteries, we cannot guarantee the quality of this product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period
of time with doors and windows closed.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
12
VQT3E80 (ENG)
and then .
2 3