Symbols And Indicators; Displaying Port Information; Port Card View - HP StorageWorks 2/140 - Director Switch Product Manager Manual

Monitoring and Managing the Director

Symbols and Indicators

The following figure illustrates the status symbols and LED indicators that may
display on a port card in the Port Card View.
Figure 2–10: Port Card View
UPM
Refer to the following numbered list for the meaning of the status symbols and LED
indicators shown on the Port Card View in
detail under

Displaying Port Information

Double-click a port or right-click on a port and choose Port Properties from the menu
to display the port's Properties dialog box, as shown in
dialog box by:
• When you double-click on a row in the Port List View or right-click on a row and
choosing Port Properties from the pop-up menu.
2–16
1 An amber LED (at the top of the card) that
illuminates if any port fails or blinks if FRU
1
beaconing is enabled.
2 A bank of amber and green LEDs above the ports.
One amber LED and one green LED are associated
2 with each port and indicate port status as follows:
•
•
•
3
•
3 Four duplex LC connectors for attaching fiber-optic
cables.
SHR-2274
"Port Operational States" on
The green LED illuminates (or blinks if there is
active traffic) and the amber LED extinguishes to
indicate normal port operation.
The amber LED illuminates and the green LED
extinguishes to indicate a port failure.
Both LEDs extinguish to indicate a port is
operational but not communicating with an
N_Port (no cable attached, loss of light, port
blocked, or link recovery in process).
The amber LED flashes and the green LED
either remains on, extinguishes, or flashes to
indicate a port is beaconing or running online
diagnostics.
Figure 2–10. Port states are described in
page 2–41.
director product manager user guide
Figure 2–11. Also display this