Element Listing Information - Rxperformance Area Menu - HP StorageWorks 2/64 - Core Switch Administrator's Manual

Hp storageworks fabric os 5.x fabric watch administrator guide (aa-rvj0b-te, september 2005)

Hide thumbs Also See for StorageWorks 2/64 - Core Switch:

Command reference manual (830 pages)

Reference manual (278 pages)

Installation manual (166 pages)

Table Of Contents

Table of Contents

The fwConfigure menu contains 12 menu items. The first 11 items correspond to the classes available

for configuration. Item 12, which is the default, exits the fwConfigure application.

From the list displayed, enter the number corresponding to the class that you want to configure. For

example, if you enter 5, the menu corresponding to the E-Port class appears.

: Link loss

: Sync loss

: Signal loss

: Protocol error

: Invalid words

: Invalid CRCS

: RXPerformance

: TXPerformance

: State Changes

10 : return to previous page

Select an area => : (1..10) [10] 7

For each class that you select, Fabric Watch provides a list of the areas of the class available for

configuration. The final item in the list, which is always the default, returns you to the previous selection

screen.

Enter the number corresponding to the area that you want to configure, such as 7 for RXPerformance.

Fabric Watch displays a list of monitored elements in this area:

Index ThresholdName

LastEvent

=====================================================================================

eportRXPerf008

inBetween

17 eportRXPerf017

inBetween

26 eportRXPerf026

inBetween

27 eportRXPerf027

inBetween

28 eportRXPerf028

inBetween

29 eportRXPerf029

inBetween

1 : refresh

2 : disable a threshold

3 : enable a threshold

4 : advanced configuration

5 : return to previous page

Select choice => : (1..5) [5]

Table 12

describes the column headers in the RXPerformance menu (shown in

Table 12