HP StorageWorks P9000 User Manual page 81

Error Code Error Message and Description
TYPE statement is wrong value or not
CCNV106-I
specified.
Code (code) to customize does not exist in
CCNV108-I
the code conversion table.
The I/O error of the code conversion table
occurred.
CCNV109-I
An error occurred during input/output of
the code conversion table.
Insufficient memory to generate the code
CCNV10A-I
conversion table.
The parameter of CODE statement is
mismatching with the parameter of a TYPE
statement.
CCNV10B-I
Parameter option for CODE cannot be
specified with the type of conversion
specified.
Cannot find Definition statement file.
The definition statement file specified in the
CCNV10C-I
command parameter does not exist in the
directory where the utility is executed.
The I/O error of Definition statement file
occurred.
CCNV10D-I
An error occurred during input/output of
the Definition Statement file.
System action: Terminates operation
(Termination code 12).
User action: Re-execute after checking the
following:
• HOSTtoBIG5 or BIG5toHOST is spe-
cified for TYPE.
• TYPE is specified.
System action: Proceeds to the next
definition statement (Termination code 08).
User action: Check the code to customize,
and then re-execute.
System action: Terminates operation
(Termination code 12).
User action: Re-execute after checking the
following:
• The code conversion table to customize
has a readable file attribute.
• The code conversion table to customize
exists.
• A read-only table that has the same
name as the output table exists in the
same directory with an attribute.
• The output directory of the table is read-
only.
System action: Terminates operation
(Termination code 12).
User action: Re-execute after increasing
available memory.
System action: Proceeds to the next
definition statement (Termination code 12).
User action: Re-execute after checking the
options for TYPE and CODE.
System action: Terminates operation
(Termination code 12).
User action: Check that the definition
statement file specified exists, and if it does
not, re-execute after setting up the file.
System action: Terminates operation
(Termination code 12).
User action: Check the condition of the
definition statement file or the system, and
then re-execute.
P9000 Data Exchange Code Converter User Guide
Action(s)
81