Changing The Port Settings Of The Tm Printer - Epson M00002104 Install Manual

Changing the port settings of the TM printer

See the procedure below to change the port settings of the TM printer, such as changing serial
settings of the serial connection, changing the IP Address of the TM printer connected by
Ethernet, and so on. The port settings of the Epson port will be changed in this procedures.
1
Select from [Start] - [Control Panel] - [Hardware and Sound] and open
[Printers] and then right click the target printer driver and select
[Properties].
2
The property screen of the TM printer appears. Select the [Ports] tab and
then click the [Configure Port...] button.
3
The Configure Port screen appears. Then change the settings and click
the [OK] button.
2 >
4
The display returns to the Properties screen. When you click the [OK]
button, the changes you made becomes effective.
56
3 >
Serial
Ethernet