Table of Contents
Advertisement
When you place your dots on this grid, remember that dots cannot
go on horizontal lines, but they can go on vertical lines so long as they
do not overlap any other dots. As you design your characters, draw
the dots as large as you see them in the example on the left in Figure
8-2. If you draw them smaller, you may have overlapping dots with-
realizing it.
out
I
Figure 8-2. Correct and incorrect designs
If you do accidentally call for overlapping dots, don't worry. The
program will still work, but only one of the dots will be printed.
First definition program
Once you. have drawn your dots on the grid, type in the following
BASIC program and run it. If you are using Applesoft BASIC, see
Appendix F.
.overlapping dots
dot on horizontal line
63
Advertisement
Table of Contents
