Samsung PN64D7000FFXZA User Manual page 10

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the POWER button.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step in the Plug & Play sequence, select Previous, and then press
✎
Before turning on the TV, make sure you have connected the TV to an antenna or cable connection (p. 8).
1 Selecting the OSD
Language
2 Setting up Network
3
Software Upgrade
4 Selecting the usage
mode
5 Setting the Clock
Mode
6 Selecting search
options for auto tuning
7 Selecting and
memorizing channels
8 Enjoy your TV.
If You Want to Rerun Plug & Play...
MENU System Plug & Play
✎
NOTE
To change the TV's setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume bar on the screen, press and hold the
Plug & Play (Initial Setup)
Press the or button to select a language. Press
when done.
Set up your network connection. Press the
you do not know your network set up information or want to set to it later,
select Skip. We suggest you skip network connection setup now and
refer to "Wired/Wireless Network Connection" in the e-Manual for set up
requirements and instructions, and the Network Connection section of this
manual (Page 16). You can set up the network connection later using the
Network menu.
When network connection settings are complete, Software Upgrade is available.
Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV need a
software upgrade. If you want to upgrade later, select the Skip. For more information, refer
to "Software Upgrade" (Preference Features
✎
This may take some time, depending on network status.
Press the or button to select, and then press the
Select the Home Use mode. Store Demo mode is for retail environments.
Press the or button to select Auto or Manual, and then press
✎
If you selected Auto, you'll go to the Time Zone and DST screen. Select Time Zone
or DST, and then press ENTER
button to select your zone, and then press
ENTER , then select whether to turn DST (Daylight Savings Time) on or off. When
done, press ENTER .
✎
If you selected Manual, you'll go to the Date and Time screen. Select Date or Time,
and then press ENTER . Then, use the number buttons or the
set the date or time. Use the
done setting the Date and Time, select Next, and then press
Press the or button to select Air or Cable, and then press
appears on your selection. Select Next, and then press the
check both if you have both connected.
✎
If you selected Cable, you'll go to the Cable System screen. Use the
to select Digital or Analog, and then press.
to select the correct cable signal format - STD, HRC, or IRC - and then press
ENTER . Most cable systems use STD. Select the correct cable signal format for
both the Digital and Analog systems.
When done, select Search, and the press
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel
✎
Press the ENTER button at any time to interrupt the memorization process.
If you want to watch a broadcast program, select Close. If you want to enjoy Smart Hub,
select Smart Hub. Smart Hub will start. For more detailed information, refer to "Smart
Hub" in the e-Manual.
ENTER
ENTER
ENTER twice
ENTER button to start. If
Support Menu) in the e-Manual.
ENTER button twice.
. On the Time Zone screen, use the
ENTER . On the DST screen, press,
or button to move between entry fields. When
ENTER
ENTER
ENTER
ENTER . Use the
ENTER .
Auto Program in the e-Manual.
MENU button on the TV for 5 sec.
.
POWER
P
ENTER twice.
or
or button to
.
. A check
button. You can
or button
or button