Table of Contents
Advertisement
T
f
l(
To activate the transmitter, Press the Press-To-Talk switch on micro-
phone. The TX LED indicator will light, indicating a signal is being
transmitted. Release the switch to receive. When transmitting, hold the
microphone approximately two inches from your mouth and speak clearly
in a normal voice. The microphone provided with your radio is a 500
ohm dynamic type.
NOTE: You cannot transmit on Weather Channels 0-9 or Channel 15.
The Channel Number in the LCD Panel will blink to indicate
these channels are "receive-only".
DIMMING THE LCD DISPLAY BACKLlGHT AND THE TX INDICATOR
When the LTD 950 is shipped from the factory, the LCD Panel and the
TX LED will be brightest. Successive presses of the DIM button will
change the brightness. The change will be kept in memory.
Note that the TX LED is not turned Off by the DIM button.
OPTIONAL ACCESSORIES
Flush mounting bracket for "in dash" installation.
PA Speaker
Contact your President Marine Dealer for information.
15
LCD Panel
rBRIGMH%ESsH
OFF
H
DIM
HBRIJi'.ESS
TX Indicator
Hide quick links:
Advertisement
Table of Contents
