TRENDnet TE100-P21 User Manual page 10

* There are five green LED indicators on the front panel:
LEDs
Power
USB1
USB2
LPT
LAN
**Reset Unit
•
Press and release reset button to reset the print server
Restore to Factory Default
•
Press and hold this button for three seconds (the USB LED on
the front panel will light up) and then release it, the print
server will restore to factory default settings.
Steady light means power on.
When it is blinking, the connected printer is
printing.
When it is blinking, the connected printer is
printing.
When blinking, the connected printer is printing.
Steady light means the print server has been
connected to the network.
When blinking (briefly dark), the print server is
receiving/ transmitting data from/to the network.
- 10 -
Description