Epson FX-286e User Manual page 16

Figure 1-8.
Open pin-feed cover
4. Guide the paper into the paper slot, and push it through until it
comes up between the ribbon guide and the platen. (Moving the
paper with a side-to-side motion makes it easier to push the paper
through.)
5. Pull the paper up until the top is above the pin-feed holders. Fit the
holes on the left side of the paper over the pins in the left holder (as
shown in Figure 1-9) and close the cover.
Figure 1-9.
Fitting the paper over the
Setting Up Your FX Printer
pin feeds
1-9