For Dos Programs - Epson FX-2190 User Manual

6. Click Browse and select the path for the printer driver. Then click
OK and follow the on-screen instructions.
If you are using Windows NT, insert your Windows CD when
prompted.
7. Select the appropriate file in the folder and click OK .
8. When prompted, insert the printer software CD-ROM and click
to select the correct path.
Browse
Note:
❏
If you see a message that the drive is not accessible, click Cancel and
try again.
❏
If a "System Error" message appears, click Cancel . The exact wording
of the message depends on the version of Windows you are using.
❏
If you are using Windows NT, you do not need to specify a path.
❏
If you are using Windows 98, the Printer Utility Setup may start. If it
does, follow the instructions on the screen.
9. When the installation is complete, see page 15 to install the
Reference Guide and the EPSON Remote Configuration Utility.

For DOS programs

To control the printer from DOS application programs, you need to select
the printer you are using or another available printer from the printer list
in your application. Choose the EPSON printer at the appropriate step in
the installation or setup procedure. If the list in your application does not
include your printer, choose the first available printer from the following
list:
For FX-890:
FX-980
FX-880+
FX-880
FX-870
FX-850
FX-800
FX-85
FX-80+
FX-80
14
Setting Up the Printer
For FX-2190:
FX-2180
FX-2170
FX-1180+
FX-1180
FX-1170
FX-1050
FX-1000
FX-105
FX-100+
FX-100