Temperature Control; Energy Saver - LG LW6013ER Owner's Manual

6,000 btu window air conditioner with remote
Hide thumbs Also See for LW6013ER:
Table of Contents

Advertisement

Dry - Dry mode is used to remove humidity from the room without additional cooling.
Once the set temperature is reached the compressor and circulation fan turns off.
Fan speed is pre-set and cannot be adjusted.

TEMPERATURE CONTROL

The thermostat monitors room temperature to maintain the desired temperature.
The thermostat can be set between 60 F~86 F (16 C~30 C).

Energy Saver

The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air
temperature if cooling is needed.
During operation in failure of electric power, the unit runs as previous setting operation.
1. Push out the cover on the back of the remote control with your thumb.
2. Pay attention to polarity and insert two new AAA 1.5V batteries.
3. Reattach the cover.
Do not use rechargeable batteries. Make sure that the batteries are new.
Do not mix alkaline, standard (Carbon-zinc) or rechargeable (Nickel-cadmium)
batteries.
- In order to prevent discharge, remove the batteries from the remote control if
the air conditioner is not going to be used for an extended period of time.
Keep the remote control away from extremely hot or humid places.
To maintain optimal operation of the remote control, the remote sensor should
not be exposed to direct sunlight.
y
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents