Asus Eee PC 2G Series User Manual page 84

5. A dialog box appears. Follow the instructions to eject the USB
disk and replug it to your PC/NB. Click Retry to continue.
Click OK to complete the process.
6.
7. Connect the USB flash disk to your Eee PC.
Start the system and press <F2> on bootup to enter the BIOS
8.
setup. Go to Boot > Hard Disk Drives and select the USB drive
(may be labeled as "USB:XXXX") as the 1st Drive.
Go to Boot > Boot Device Priority and select the USB drive (may
9.
be labeled as "USB:XXXX") as the 1st Boot Device.
10 Press <F10> to save the configuration and reboot from the USB
flash disk.
11. Key in yes and press <Enter> to continue the system recovery.
12 When the recovery is completed, remove the USB flash disk and
press <Enter> to reboot the system.
5-6 Chapter 5: System Recovery