Using The Timer Q Menu - Sony Fd Trinitron WEGA KV-27FS120 Operating Instructions Manual

Using the Timer Menu
To access the Timer menu. use the following steps:
To Display
MENU
To Highlight _ To Select
°%°%
Current Time Set your TV to the current day and time. Press _ to open the Current
Time menu:
1 Use the & or _" buttons to enter the correct day and time,
then press _.
2 Press _" to exit the menu.
_ You mUst set the Curreni Time before y0u can use Timer i 0r Timer 2
Timer 1 and Use the timers to program your TV to turn on and off by day, time,
Timer 2 duration, and channel. The timer duration is a maximum of six hours.
Schedzded When the channel is fixed, it is not necessary to set the channel.
viewing
1
Use the _) or O buttons to highlight
Timer 1 or Timer 2,
then press CE3.
2 Use the _ or _ buttons to enter the desired day, start time, duration,
and channel, then press _. The timer status should be On when the
Timer has been set, and the timer light on the front panel of the TV
should be on.
3 Press _J to exit the menu.
_,_ Select Off to turn off the Timer Your previous settings will be saved
f_ When you perform Auto Program, Timer 1 and Timer 2 settings will be Cleared. Also, in the event of
any loss of power, Current Time, Timer 1; and Timer 2 settings will be cleared.
39